Standard
0.6" Textile Dome Tweeter
FIADT1010-0400
Features
0.6”, Plastic Frame
0.6” CCAW Voice Coil , Aluminum Former
Silk Diaphragm , FIXED Surround
Neodymium Magnet Motor System
Parameters
Size
0.6 Inch
Fs
2100 Hz
Re
4.1 Ohms
Sensitivity
86 dB
Quality Factor
1.57 Qts
Rated Power
10 W
This is a 0.6 inch 4 ohm driver, it is a tweeter features 0.6 inch voice coil with CCAW. In term of suspension system, dome is consisted by textile material. In term of magnet motor system, magnet is consisted by Neodymium material. It can be used on portable speaker model.
Family
Range
| T-S Parameters | |
|---|---|
| Resonance frequency [fs] | 2100 Hz |
| Mechanical Q factor [Qms] | 2.53 |
| Electrical Q factor [Qes] | 4.14 |
| Total Q factor [Qts] | 1.575 |
| Force factor [Bl] | 1.435 Tm |
| Mechanical resistance [Rms] | 0.788 kg/s |
| Moving mass [Mms] | 0.151 g |
| Compliance [Cms] | 0.038 mm/N |
| Effective diaph. diameter [D] | 18.5 mm |
| Effective piston area [Sd] | 2.69 cm² |
| Equivalent volume [Vas] | 0.0004 l |
| Sensitivity (2.83V/1m) | 86 dB |
| Ratio Bl/√Re | 0.708 N/√W |
| Ratio fs/Qts | 1333 Hz |
| Electrical Data | |
|---|---|
| Nominal impedance [Zn] | 4 Ω |
| Minimum impedance [Zmin] | 4.3 Ω |
| Maximum impedance [Zo] | 6.13 Ω |
| DC resistance [Re] | 4.1 Ω |
| Voice coil inductance [Le] | 0.03 mH |
| Power Handling | |
|---|---|
| 100h RMS noise test (IEC 18.4) | 10 W |
| Long-term max power (IEC 18.2) | - W |
| Voice Coil & Magnet Data | |
|---|---|
| Voice coil diameter | 16.4 mm |
| Voice coil height | 2 mm |
| Voice coil layers | 2 |
| Height of gap | 2 mm |
| Linear excursion | ± 0 mm |
| Max mech. excursion | ± -mm |
| Unit weight | 0.023 kg |
