ASDDT1000-0400
ASDDT1000-0400
ASDDT1000-0400
family logo
0.6" Textile Dome Tweeter

ASDDT1000-0400

Feature
0.6", Plastic Frame
Textile Dome Diaphragm
Neodymium Magnet Motor System
Water Proof Speakers IPX7
Low Distortion (<3%)
Size
0.6 Inch
Fs
1780 Hz
Re
4 Ohms
Sensitivity
86 dB
Quality Factor
1.92 Qts
Rated Power
10 W
  • Description
  • Simulation
  • Measure Chart
  • Specification
  • Mechanical Drawing
SPEC SHEET

This compact Tweeter features an 4 ohm 0.6 inch voice coil, a textile dome diaphragm and Neodymium magnet motor system. This Tweeter uses CCAW, which further extend the high frequency response and is up to the standard of IPX7. The clever design of a circular frame is easy to install into customized faceplates.

Family
Range
ASDDT1000-0400

T-S Parameters
Resonance frequency [fs] 1780 Hz
Mechanical Q factor [Qms] 5.143
Electrical Q factor [Qes] 3.065
Total Q factor [Qts]  1.921
Force factor [Bl] 1.387 Tm
Mechanical resistance [Rms] 0.284 kg/s
Moving mass [Mms]  0.131 g
Compliance [Cms] 0.061 mm/N
Effective diaph. diameter [D]  18 mm
Effective piston area [Sd] 2.54 cm²
Equivalent volume [Vas] 0.0006 l
Sensitivity (2.83V/1m)  86 dB
Ratio Bl/√Re 0.69 N/√W
Ratio fs/Qts 926.6 Hz
Electrical Data
Nominal impedance [Zn]  4 Ω
Minimum impedance [Zmin]  4.27 Ω
Maximum impedance [Zo] 10.0 Ω
DC resistance [Re] 4.03 Ω
Voice coil inductance [Le]  0.028 mH
Power Handling
100h RMS noise test (IEC 18.4) 10 W
Long-term max power (IEC 18.2) - W
Voice Coil & Magnet Data
Voice coil diameter 16.4 mm
Voice coil height 2 mm
Voice coil layers 2
Height of gap 2 mm
Linear excursion ± 0 mm
Max mech. excursion ± - mm
Unit weight 0.022 kg

 

ASDDT1000-0400

聯絡我們

想了解更多產品資訊,請隨時與我們聯繫。

*表示必填欄位