6.5” Magnesium-Lithium Cone Woofer
AUGWL0016-JN02
Features
6.5”, Aluminum Die-cast Frame
2” CCAW Voice Coil, Aluminum Former
Mg-Li Alloy Cone, Rubber Surround
Ferrite Magnet Motor System
Target Frequency 30Hz~4KHz
Low Distortion (<1%)
Parameters
Size
6.5 Inch
Fs
40 Hz
Re
3.38 Ohms
Sensitivity
90 dB
Quality Factor
0.32 Qts
Rated Power
80 W
This 6.5 inch Aluminum Alloy Woofer, Aluminum Die-Cast Frame with Mg-Li Alloy cone. It has good
process ability and high yield for mass production. Because of this special raw material structure and
unique processing technology, from magnesium lithium metal foil, the attributes of Magnesium Lithium
offer high strength, good rigidity, good heat resistance, low density and so on.
Family
Range
Characteristics
| T-S Parameters | |
|---|---|
| Resonance frequency [fs] | 42.2 Hz |
| Mechanical Q factor [Qms] | 2.374 |
| Electrical Q factor [Qes] | 0.372 |
| Total Q factor [Qts] | 0.322 |
| Force factor [Bl] | 7.065 Tm |
| Mechanical resistance [Rms] | 2.31kg/s |
| Moving mass [Mms] | 20.69 g |
| Compliance [Cms] | 0.686mm/N |
| Effective diaph. diameter [D] | 132.6 mm |
| Effective piston area [Sd] | 138.09 cm² |
| Equivalent volume [Vas] | 18.51 l |
| Sensitivity (2.83V/1m) | 90 dB |
| Ratio Bl/√Re | 3.84N/√W |
| Ratio fs/Qts | 131.05 Hz |
| Electrical Data | |
|---|---|
| Nominal impedance [Zn] | 4 Ω |
| Minimum impedance [Zmin] | 4.3 Ω |
| Maximum impedance [Zo] | 24.1 Ω |
| DC resistance [Re] | 3.38 Ω |
| Voice coil inductance [Le] | 0.08 mH |
| Power Handling | |
|---|---|
| 100h RMS noise test (IEC 18.4) | 80 W |
| Long-term max power (IEC 18.2) | 100 W |
| Voice Coil & Magnet Data | |
|---|---|
| Voice coil diameter | 49.55 mm |
| Voice coil height | 16 mm |
| Voice coil layers | 2 |
| Height of gap | 6 mm |
| Linear excursion | ± 5 mm |
| Max mech. excursion | ± 12.5 mm |
| Unit weight | 2.4 kg |
