Standard
10" Mica Cone Subwoofer
AUISD0025-CB02
Features
10", Steel Frame
1.77" 1-APISV2W Voice Coil, Aluminum Former
Mica Cone, Foam PU Surround
Dual Ferrite Magnet Motor System
Subwoofer, High Power Handling
Parameters
Size
10 Inch
Fs
50 Hz
Re
5.22 Ohms
Sensitivity
87 dB
Quality Factor
0.73 Qts
Rated Power
60 W
This is a 10 inch 6 ohm driver, it is a Subwoofer features 1.8 inch voice coil with PISV2W. In term of suspension system, cone is consisted by Mica Cone body with Foam surround and spider is consisted by NC. In term of magnet motor system, magnet is consisted by Ferrite material. It can be used on Subwoofer model.
Family
Range
| T-S Parameters | |
|---|---|
| Resonance frequency [fs] | 48.4 Hz |
| Mechanical Q factor [Qms] | 7.056 |
| Electrical Q factor [Qes] | 0.816 |
| Total Q factor [Qts] | 0.731 |
| Force factor [Bl] | 11.194 Tm |
| Mechanical resistance [Rms] | 2.776 kg/s |
| Moving mass [Mms] | 64.415 g |
| Compliance [Cms] | 0.168 mm/N |
| Effective diaph. diameter [D] | 206 mm |
| Effective piston area [Sd] | 333.29 cm² |
| Equivalent volume [Vas] | 26.3904 l |
| Sensitivity (2.83V/1m) | 87 dB |
| Ratio Bl/√Re | 4.9 N/√W |
| Ratio fs/Qts | 66.2 Hz |
| Electrical Data | |
|---|---|
| Nominal impedance [Zn] | 6 Ω |
| Minimum impedance [Zmin] | 6.78 Ω |
| Maximum impedance [Zo] | 36.68 Ω |
| DC resistance [Re] | 5.22 Ω |
| Voice coil inductance [Le] | 1.69 mH |
| Power Handling | |
|---|---|
| 100h RMS noise test (IEC 18.4) | 60 W |
| Long-term max power (IEC 18.2) | - W |
| Voice Coil & Magnet Data | |
|---|---|
| Voice coil diameter | 44.91 mm |
| Voice coil height | 14.5 mm |
| Voice coil layers | 4 |
| Height of gap | 6 mm |
| Linear excursion | ± 4.25 mm |
| Max mech. excursion | ± - mm |
| Unit weight | 2.67 kg |
