3.5" Paper Cone Subwoofer
AUGSL3096-JN01
Features
3.5”, Plastic Frame
0.8” PESVCCAW Voice Coil , Paper Former
Paper Diaphragm , PU Surround
Neodymium Magnet Motor System
Low Distortion(<3%)
Long/High Excursion (±5mm)
Parameters
Size
3.5 Inch
Fs
75 Hz
Re
3.2 Ohms
Sensitivity
85 dB
Quality Factor
0.28 Qts
Rated Power
10 W
The ultimate 3.5 inch 4 ohm Subwoofer features 0.8 inch PESVCCAW voice coil, PU surround with customized Paper cone, and Neodymium magnet motor system. It is the greatest usages for subwoofer models.
Family
Range
| T-S Parameters | |
|---|---|
| Resonance frequency [fs] | 74.4 Hz |
| Mechanical Q factor [Qms] | 7.29 |
| Electrical Q factor [Qes] | 0.294 |
| Total Q factor [Qts] | 0.282 |
| Force factor [Bl] | 5.06 Tm |
| Mechanical resistance [Rms] | 0.321 kg/s |
| Moving mass [Mms] | 5 g |
| Compliance [Cms] | 0.916 mm/N |
| Effective diaph. diameter [D] | 64 mm |
| Effective piston area [Sd] | 32.17 cm² |
| Equivalent volume [Vas] | 1.34 l |
| Sensitivity (2.83V/1m) | 85 dB |
| Ratio Bl/√Re | 2.84 N/√W |
| Ratio fs/Qts | 263.8 Hz |
| Electrical Data | |
|---|---|
| Nominal impedance [Zn] | 4 Ω |
| Minimum impedance [Zmin] | 4.2 Ω |
| Maximum impedance [Zo] | 77.3 Ω |
| DC resistance [Re] | 3.2 Ω |
| Voice coil inductance [Le] | 0.179 mH |
| Power Handling | |
|---|---|
| 100h RMS noise test (IEC 18.4) | 10 W |
| Long-term max power (IEC 18.2) | - W |
| Voice Coil & Magnet Data | |
|---|---|
| Voice coil diameter | 20.32 mm |
| Voice coil height | 21.3 mm |
| Voice coil layers | 2 |
| Height of gap | 6 mm |
| Linear excursion | ± 7.65 mm |
| Max mech. excursion | ± - mm |
| Unit weight | 0.635 kg |
