Standard
3.25" Carbon Fiber Cone Fullrange
AUGWLBALT-JD01
Features
3.25", Plastic Frame
1" PESVW Voice Coil, Aluminum Former
Carbon Fiber Pule cone Rubber Surround
Ferrite Magnet Motor System
Linear High Excursion
Parameters
Size
3.25 Inch
Fs
95 Hz
Re
3.5 Ohms
Sensitivity
84 dB
Quality Factor
0.55 Qts
Rated Power
10 W
The ultimate 3.25 inch, 4 ohm Plastic frame driver have been newly designed with 1 inch PESVW voice coil and Aluminum former, Upgraded Carbon fiber Pulp diaphragm and Ferrite magnet motor system to provide wide range sound experience. This spectacular driver is the new benchmark for soundbar systems.
Family
Range
| T-S Parameters | |
|---|---|
| Resonance frequency [fs] | 95 Hz |
| Mechanical Q factor [Qms] | 3.029 |
| Electrical Q factor [Qes] | 0.668 |
| Total Q factor [Qts] | 0.547 |
| Force factor [Bl] | 4.863 Tm |
| Mechanical resistance [Rms] | 1.516 kg/s |
| Moving mass [Mms] | 6.742 g |
| Compliance [Cms] | 0.32 mm/N |
| Effective diaph. diameter [D] | 68 mm |
| Effective piston area [Sd] | 36.3 cm² |
| Equivalent volume [Vas] | 0.5973 l |
| Sensitivity (2.83V/1m) | 84 dB |
| Ratio Bl/√Re | 2.6 N/√W |
| Ratio fs/Qts | 173.6 Hz |
| Electrical Data | |
|---|---|
| Nominal impedance [Zn] | 4 Ω |
| Minimum impedance [Zmin] | 4.3 Ω |
| Maximum impedance [Zo] | 15.3 Ω |
| DC resistance [Re] | 3.5 Ω |
| Voice coil inductance [Le] | 0.067 mH |
| Power Handling | |
|---|---|
| 100h RMS noise test (IEC 18.4) |
10 W |
| Long-term max power (IEC 18.2) | - W |
| Voice Coil & Magnet Data | |
|---|---|
| Voice coil diameter | 25.4 mm |
| Voice coil height | 14 mm |
| Voice coil layers | 2 |
| Height of gap | 4 mm |
| Linear excursion | ± 5 mm |
| Max mech. excursion | ± - mm |
| Unit weight | 0.73 kg |
