AUGWL0010-JN04
AUGWL0010-JN04
AUGWL0010-JN04
family logo
4” Magnesium-Lithium Woofer

AUGWL0010-JN04

Feature
4”, Aluminum Die-cast Frame
1” CCAW Voice Coil, Aluminum Former
Mg-Li Alloy Cone, SBR Surround
Ferrite Magnet Motor System
Target Frequency 40Hz~5KHz
Low Distortion (<1%)
Size
4 Inch
Fs
60 Hz
Re
4 Ohms
Sensitivity
88 dB
Quality Factor
0.4 Qts
Rated Power
35 W
  • Description
  • Simulation
  • Measure Chart
  • Specification
  • Mechanical Drawing
SPEC SHEET

This 4 inch Aluminum Alloy woofer, Aluminum Die-Cast Frame with Mg-Li Alloy cone. It has good process
ability and high yield for mass production. Because of this special raw material structure and unique
processing technology, from magnesium lithium metal foil, the attributes of Magnesium Lithium offer
high strength, good rigidity, good heat resistance, low density and so on.

Family
Range
Characteristics
AUGWL0010-JN04

T-S Parameters
Resonance frequency [fs] 61.4 Hz
Mechanical Q factor [Qms] 3.565
Electrical Q factor [Qes] 0.456
Total Q factor [Qts]  0.404
Force factor [Bl] 4.35 Tm
Mechanical resistance [Rms] 0.742 kg/s
Moving mass [Mms]  6.858 g
Compliance [Cms] 0.979 mm/N
Effective diaph. diameter [D]  82.5 mm
Effective piston area [Sd] 53.46 cm²
Equivalent volume [Vas] 3.96 l
Sensitivity (2.83V/1m)  88 dB
Ratio Bl/√Re 2.42 N/√W
Ratio fs/Qts 151.98 Hz
Electrical Data
Nominal impedance [Zn]  4 Ω
Minimum impedance [Zmin]  3.9 Ω
Maximum impedance [Zo] 27 Ω
DC resistance [Re] 3.26 Ω
Voice coil inductance [Le]  0.046 mH
Power Handling
100h RMS noise test (IEC 18.4) 35 W
Long-term max power (IEC 18.2) 50 W
Voice Coil & Magnet Data
Voice coil diameter 25.5 mm
Voice coil height 12.5 mm
Voice coil layers 2
Height of gap 6 mm
Linear excursion ± 3.25 mm
Max mech. excursion ± - mm
Unit weight 0.95 kg
AUGWL0010-JN04

聯絡我們

想了解更多產品資訊,請隨時與我們聯繫。

*表示必填欄位