Standard
8" Paper Cone Subwoofer
FSISD5080-8400
Features
8", Steel Frame
1.2" PESVW Voice Coil, Aluminum Former
Paper Cone, Rubber Surround
Strong Ferrite Magnet Motor System
Long Excursion(±5.4mm)
Parameters
Size
8 Inch
Fs
45 Hz
Re
3.4 Ohms
Sensitivity
89 dB
Quality Factor
0.45 Qts
Rated Power
50 W
This is a 8 inch 4 ohm driver, it is a Subwoofer features 1.4 inch voice coil with PESVW. In term of suspension system, cone is consisted by Paper Cone body with NBR surround and spider is consisted by NC. In term of magnet motor system, magnet is consisted by Ferrite material. It can be used on active Subwoofer model.
Family
Range
| T-S Parameters | |
|---|---|
| Resonance frequency [fs] | 45 Hz |
| Mechanical Q factor [Qms] | 5.85 |
| Electrical Q factor [Qes] | 0.496 |
| Total Q factor [Qts] | 0.457 |
| Force factor [Bl] | 9.75 Tm |
| Mechanical resistance [Rms] | 2.35 kg/s |
| Moving mass [Mms] | 47.7 g |
| Compliance [Cms] | 0.253 mm/N |
| Effective diaph. diameter [D] | 160 mm |
| Effective piston area [Sd] | 201.06 cm² |
| Equivalent volume [Vas] | 14.47 l |
| Sensitivity (2.83V/1m) | 89 dB |
| Ratio Bl/√Re | 5.29 N/√W |
| Ratio fs/Qts | 98.45 Hz |
| Electrical Data | |
|---|---|
| Nominal impedance [Zn] | 4 Ω |
| Minimum impedance [Zmin] | 4.07 Ω |
| Maximum impedance [Zo] | 37.8 Ω |
| DC resistance [Re] | 3.4 Ω |
| Voice coil inductance [Le] | 1.237 mH |
| Power Handling | |
|---|---|
| 100h RMS noise test (IEC 18.4) | 50 W |
| Long-term max power (IEC 18.2) | - W |
| Voice Coil & Magnet Data | |
|---|---|
| Voice coil diameter | 30.5 mm |
| Voice coil height | 18.8 mm |
| Voice coil layers | 4 |
| Height of gap | 8 mm |
| Linear excursion | ± 5.4 mm |
| Max mech. excursion | ± - mm |
| Unit weight | 2.37 kg |
