FSB526054-5300
FSB526054-5300
Standard
5.25" Paper Cone Subwoofer

FSB526054-5300

Features
5.25", Steel Frame
1" PESVW Voice Coil, Aluminum Former
Paper Cone, Rubber Surround
Strong Ferrite Magnet Motor System
Size
5.25 Inch
Fs
80 Hz
Re
2.38 Ohms
Sensitivity
86 dB
Quality Factor
0.9 Qts
Rated Power
60 W
  • Description
  • Measure Chart
  • Specification
  • Mechanical Drawing
SPEC SHEET

This is a 5.25 inch 3 ohm driver, it is a Subwoofer features 1 inch voice coil with PESVW. In term of suspension system, cone is consisted by Paper Cone body with NBR surround and spider is consisted by NC. In term of magnet motor system, magnet is consisted by Ferrite material. It can be used on active Subwoofer model.

Family
Range
 
T-S Parameters
Resonance frequency [fs] 79.3 Hz
Mechanical Q factor [Qms] 5.197
Electrical Q factor [Qes] 1.099
Total Q factor [Qts]  0.907
Force factor [Bl] 4.219 Tm
Mechanical resistance [Rms] 1.581 kg/s
Moving mass [Mms]  16.496 g
Compliance [Cms] 0.244 mm/N
Effective diaph. diameter [D]  112 mm
Effective piston area [Sd] 98.52 cm²
Equivalent volume [Vas] 3.3559 l
Sensitivity (2.83V/1m)  86 dB
Ratio Bl/√Re 2.735 N/√W
Ratio fs/Qts 87.4 Hz
Electrical Data
Nominal impedance [Zn]  3 Ω
Minimum impedance [Zmin]  2.982 Ω
Maximum impedance [Zo] 9.296 Ω
DC resistance [Re] 2.38 Ω
Voice coil inductance [Le]  0.42 mH
Power Handling
100h RMS noise test (IEC 18.4) 60 W
Long-term max power (IEC 18.2) - W
Voice Coil & Magnet Data
Voice coil diameter 25.4 mm
Voice coil height 8.5 mm
Voice coil layers 4
Height of gap 4 mm
Linear excursion ± 2.25 mm
Max mech. excursion ± - mm
Unit weight 0.553 kg

 

FSB526054-5300

聯絡我們

想了解更多產品資訊,請隨時與我們聯繫。

*表示必填欄位

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.