FSB524060-6401
FSB524060-6401
Standard
6" Paper Cone Subwoofer

FSB524060-6401

Features
6", Steel Frame
1.2" EISVW Voice Coil, Aluminum Former
Paper Cone, Rubber Surround, Long Excursion(±4.2mm)
Strong Ferrite Magnet Motor System
Linear Spider
VC Former and Basket Vent, Low Distortion(<3%)
Size
6 Inch
Fs
70 Hz
Re
3.5 Ohms
Sensitivity
86 dB
Quality Factor
0.93 Qts
Rated Power
40 W
  • Description
  • Measure Chart
  • Specification
  • Mechanical Drawing
SPEC SHEET

This is a 6 inch 4 ohm driver, it is a Subwoofer features 1.2 inch voice coil with EISVW. In term of suspension system, cone is consisted by Paper Cone body with NBR surround and spider is consisted by NC. In term of magnet motor system, magnet is consisted by Ferrite material. It can be used on active Subwoofer model.

Family
Range
 
T-S Parameters
Resonance frequency [fs] 71 Hz
Mechanical Q factor [Qms] 6.45
Electrical Q factor [Qes] 1.09
Total Q factor [Qts]  0.93
Force factor [Bl] 7.26 Tm
Mechanical resistance [Rms] 2.56 kg/s
Moving mass [Mms]  37.27 g
Compliance [Cms] 0.14 mm/N
Effective diaph. diameter [D]  129 mm
Effective piston area [Sd] 130.7 cm²
Equivalent volume [Vas] 3.29 l
Sensitivity (2.83V/1m)  86 dB
Ratio Bl/√Re 3.88 N/√W
Ratio fs/Qts 76.3 Hz
Electrical Data
Nominal impedance [Zn]  4 Ω
Minimum impedance [Zmin]  4.0 Ω
Maximum impedance [Zo] 22.7 Ω
DC resistance [Re] 3.5 Ω
Voice coil inductance [Le]  0.84 mH
Power Handling
100h RMS noise test (IEC 18.4) 40 W
Long-term max power (IEC 18.2) - W
Voice Coil & Magnet Data
Voice coil diameter 30.5 mm
Voice coil height 14.4 mm
Voice coil layers 4
Height of gap 6 mm
Linear excursion ± 4.2 mm
Max mech. excursion ± - mm
Unit weight 1.168 kg

 

FSB524060-6401

聯絡我們

想了解更多產品資訊,請隨時與我們聯繫。

*表示必填欄位

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.