5.25" Carbon Cone Woofer
AUGWL0013-JN05
Features
5.25”, Aluminum Die-cast Frame
1.5” CCAW Voice Coil, Aluminum Former
Pulp and Carbon Fiber Cone, Rubber Surround
Ferrite Magnet Motor System
Conex Spider
Parameters
Size
5.25 Inch
Fs
50 Hz
Re
3.52 Ohms
Sensitivity
88 dB
Quality Factor
0.34 Qts
Rated Power
50 W
This 5.25 inch Woofer, features 1.5 inch voice coil, pulp with carbon fiber cone, and ferrite magnet motor
system. As for the selection of material, this series of driver uses a new mixed material with pulp and
60% carbon fiber, it can greatly enhance the stiffness of the cone body and control range of the internal damping.
Family
Range
Characteristics
| T-S Parameters | |
|---|---|
| Resonance frequency [fs] | 48.6 Hz |
| Mechanical Q factor [Qms] | 2.076 |
| Electrical Q factor [Qes] | 0.409 |
| Total Q factor [Qts] | 0.341 |
| Force factor [Bl] | 5.714 Tm |
| Mechanical resistance [Rms] | 1.825 kg/s |
| Moving mass [Mms] | 12.414 g |
| Compliance [Cms] | 0.865 mm/N |
| Effective diaph. diameter [D] | 110 mm |
| Effective piston area [Sd] | 95.03 cm² |
| Equivalent volume [Vas] | 11.05 l |
| Sensitivity (2.83V/1m) | 88 dB |
| Ratio Bl/√Re | 3.05 N/√W |
| Ratio fs/Qts | 142.52 Hz |
| Electrical Data | |
|---|---|
| Nominal impedance [Zn] | 4 Ω |
| Minimum impedance [Zmin] | 4.14 Ω |
| Maximum impedance [Zo] | 18.06 Ω |
| DC resistance [Re] | 3.52 Ω |
| Voice coil inductance [Le] | 0.129 mH |
| Power Handling | |
|---|---|
| 100h RMS noise test (IEC 18.4) | 50 W |
| Long-term max power (IEC 18.2) | 80 W |
| Voice Coil & Magnet Data | |
|---|---|
| Voice coil diameter | 35.5 mm |
| Voice coil height | 15 mm |
| Voice coil layers | 2 |
| Height of gap | 6 mm |
| Linear excursion | ± 4.5 mm |
| Max mech. excursion | ± 15.5 mm |
| Unit weight | 1.53 kg |
