Standard
6.5" Paper Cone Subwoofer
FSB528065-6406
Features
6.5", Steel Frame
1.4" PESVW Voice Coil, Aluminum Former
Paper Cone, Rubber Surround, Long Excursion(±7.35mm)
Strong Ferrite Magnet Motor System
Linear Spider, Pole Piece Vent, Low Distortion(<3%)
High Power Handling
Parameters
Size
6.5 Inch
Fs
50 Hz
Re
3.3 Ohms
Sensitivity
83 dB
Quality Factor
0.9 Qts
Rated Power
80 W
This is a 6.5 inch 4 ohm driver, it is a Subwoofer features 1.4 inch voice coil with PESVW. In term of suspension system, cone is consisted by Paper Cone body with NBR surround and spider is consisted by Conex. In term of magnet motor system, magnet is consisted by Ferrite material. It can be used on active Subwoofer model.
Family
Range
| T-S Parameters | |
|---|---|
| Resonance frequency [fs] | 52 Hz |
| Mechanical Q factor [Qms] | 8.47 |
| Electrical Q factor [Qes] | 1.01 |
| Total Q factor [Qts] | 0.9 |
| Force factor [Bl] | 7.02 Tm |
| Mechanical resistance [Rms] | 1.78 kg/s |
| Moving mass [Mms] | 45.72 g |
| Compliance [Cms] | 0.20 mm/N |
| Effective diaph. diameter [D] | 128 mm |
| Effective piston area [Sd] | 128.7 cm² |
| Equivalent volume [Vas] | 4.73 l |
| Sensitivity (2.83V/1m) | 83 dB |
| Ratio Bl/√Re | 3.86 N/√W |
| Ratio fs/Qts | 57.8 Hz |
| Electrical Data | |
|---|---|
| Nominal impedance [Zn] | 4 Ω |
| Minimum impedance [Zmin] | 3.89 Ω |
| Maximum impedance [Zo] | 25.42 Ω |
| DC resistance [Re] | 3.3 Ω |
| Voice coil inductance [Le] | 1.19 mH |
| Power Handling | |
|---|---|
| 100h RMS noise test (IEC 18.4) | 80 W |
| Long-term max power (IEC 18.2) | 100 W |
| Voice Coil & Magnet Data | |
|---|---|
| Voice coil diameter | 35.5 mm |
| Voice coil height | 20.7 mm |
| Voice coil layers | 4 |
| Height of gap | 6 mm |
| Linear excursion | ± 7.35 mm |
| Max mech. excursion | ± -mm |
| Unit weight | 1.26 kg |
