Standard
10" Paper Cone Woofer
FSB525001-A600
Features
10", Steel Frame
1.4" PESVW Voice Coil, GFB-G Former
Paper Cone, Foam PU Surround
Strong Ferrite Magnet Motor System
High Sensitivity
High Power Handling
Parameters
Size
10 Inch
Fs
55 Hz
Re
5.99 Ohms
Sensitivity
89 dB
Quality Factor
0.81 Qts
Rated Power
50 W
This is a 10 inch 6 ohm driver, it is a Woofer features 1.4 inch voice coil with PESVW. In term of suspension system, cone is consisted by Paper Cone body with Foam PU surround and spider is consisted by NC. In term of magnet motor system, magnet is consisted by Ferrite material. It can be used on HIFI model.
Family
Range
T-S Parameters | |
---|---|
Resonance frequency [fs] | 56.1 Hz |
Mechanical Q factor [Qms] | 12.93 |
Electrical Q factor [Qes] | 0.87 |
Total Q factor [Qts] | 0.815 |
Force factor [Bl] | 11.02 Tm |
Mechanical resistance [Rms] | 1.365 kg/s |
Moving mass [Mms] | 50.1 g |
Compliance [Cms] | 0.161 mm/N |
Effective diaph. diameter [D] | 217 mm |
Effective piston area [Sd] | 363.05 cm² |
Equivalent volume [Vas] | 30.01 l |
Sensitivity (2.83V/1m) | 89 dB |
Ratio Bl/√Re | 4.51 N/√W |
Ratio fs/Qts | 68.8 Hz |
Electrical Data | |
---|---|
Nominal impedance [Zn] | 6 Ω |
Minimum impedance [Zmin] | 5.3 Ω |
Maximum impedance [Zo] | 27.8 Ω |
DC resistance [Re] | 5.99 Ω |
Voice coil inductance [Le] | 1.108 mH |
Power Handling | |
---|---|
100h RMS noise test (IEC 18.4) | 50 W |
Long-term max power (IEC 18.2) | - W |
Voice Coil & Magnet Data | |
---|---|
Voice coil diameter | 35.5 mm |
Voice coil height | 15.3 mm |
Voice coil layers | 4 |
Height of gap | 6 mm |
Linear excursion | ± 4.65 mm |
Max mech. excursion | ± - mm |
Unit weight | 2.49 kg |