Standard
95mm x 45mm Paper Cone Woofer
ASDMD6001-0601
Features
95mm x 45mm, Steel Frame
0.6" PECCAW Voice Coil, Aluminum Former
Paper Cone, Rubber Surround
Ferrite Magnet Motor System
Low Distortion (<3%)
Power Handling with 2nd HP Filter @120Hz
Parameters
Size
1.5 Inch
Fs
140 Hz
Re
5.1 Ohms
Sensitivity
83 dB
Quality Factor
1.19 Qts
Rated Power
15 W
This is a 95mm x 45mm 6 ohm driver, it is a Woofer features 0.6 inch voice coil with CCAW. In term of suspension system, cone is consisted by Paper Cone body with Rubber surround and spider is consisted by Conex. In term of magnet motor system, magnet is consisted by Ferrite material. It can be used on Soundbar model.
Family
Range
| T-S Parameters | |
|---|---|
| Resonance frequency [fs] | 140 Hz |
| Mechanical Q factor [Qms] | 6.0 |
| Electrical Q factor [Qes] | 1.48 |
| Total Q factor [Qts] | 1.19 |
| Force factor [Bl] | 3.16 Tm |
| Mechanical resistance [Rms] | 0.49 kg/s |
| Moving mass [Mms] | 3.31 g |
| Compliance [Cms] | 0.39 mm/N |
| Effective diaph. diameter [D] | 67 mm |
| Effective piston area [Sd] | 35.16 cm² |
| Equivalent volume [Vas] | 0.68 l |
| Sensitivity (2.83V/1m) | 83 dB |
| Ratio Bl/√Re | 0.62 N/√W |
| Ratio fs/Qts | 117.65 Hz |
| Electrical Data | |
|---|---|
| Nominal impedance [Zn] | 6 Ω |
| Minimum impedance [Zmin] | 5.18 Ω |
| Maximum impedance [Zo] | 19.77 Ω |
| DC resistance [Re] | 5.1 Ω |
| Voice coil inductance [Le] | 0.268 mH |
| Power Handling | |
|---|---|
| 100h RMS noise test (IEC 18.4) | 15 W |
| Long-term max power (IEC 18.2) | 30 W |
| Voice Coil & Magnet Data | |
|---|---|
| Voice coil diameter | 16.28 mm |
| Voice coil height | 7.2 mm |
| Voice coil layers | 4 |
| Height of gap | 3 mm |
| Linear excursion | ± 2.1 mm |
| Max mech. excursion | ± - mm |
| Unit weight | 0.248 kg |
