Standard
2” Paper Cone Fullrange
ASDFL1008-0801
Features
2”, Steel Frame
0.8” PESVW Voice Coil, Kapton Former
Paper Diaphragm, Rubber Surround
Neodymium Magnet Motor System
IPX7
Low Distortion(<3%)
Parameters
Size
2 Inch
Fs
190 Hz
Re
6.59 Ohms
Sensitivity
80 dB
Quality Factor
0.6 Qts
Rated Power
15 W
The advanced 2 inch, 8 ohm steel frame driver has been meticulously designed with a 0.8 inch PESVW voice coil, an improved paper cone, and a powerful neodymium magnet motor system, bringing an expansive and immersive sound experience. This outstanding driver sets a new standard for soundbar and portable speaker systems, offering unparalleled performance and clarity.
Family
Range
| T-S Parameters | |
|---|---|
| Resonance frequency [fs] | 190 Hz |
| Mechanical Q factor [Qms] | 7.127 |
| Electrical Q factor [Qes] | 0.663 |
| Total Q factor [Qts] | 0.607 |
| Force factor [Bl] | 5.159 Tm |
| Mechanical resistance [Rms] | 0.376 kg/s |
| Moving mass [Mms] | 2.241 g |
| Compliance [Cms] | 0.312 mm/N |
| Effective diaph. diameter [D] | 36.82 mm |
| Effective piston area [Sd] | 10.65 cm² |
| Equivalent volume [Vas] | 0.05 l |
| Sensitivity (2.83V/1m) | 80 dB |
| Ratio Bl/√Re | 1.98 N/√W |
| Ratio fs/Qts | 313 Hz |
| Electrical Data | |
|---|---|
| Nominal impedance [Zn] | 8 Ω |
| Minimum impedance [Zmin] | 7.9 Ω |
| Maximum impedance [Zo] | 60.8 Ω |
| DC resistance [Re] | 6.59 Ω |
| Voice coil inductance [Le] | 0.151 mH |
| Power Handling | |
|---|---|
| 100h RMS noise test (IEC 18.4) | 15 W |
| Long-term max power (IEC 18.2) | 20 W |
| Voice Coil & Magnet Data | |
|---|---|
| Voice coil diameter | 19.4 mm |
| Voice coil height | 6.1 mm |
| Voice coil layers | 2 |
| Height of gap | 3 mm |
| Linear excursion | ± 1.5 mm |
| Max mech. excursion | ± - mm |
| Unit weight | 0.069 kg |
