FSA041006-0400
 FSA041006-0400
 FSA041006-0400
family logo
0.6" Textile Dome Tweeter

FSA041006-0400

Feature
0.6", Plastic Frame
Textile Dome Diaphragm
Neodymium Magnet Motor System
With Ferrofluid-Cooled
Low Distortion(<3%)
Size
0.6 Inch
Fs
1940 Hz
Re
4 Ohms
Sensitivity
87 dB
Quality Factor
1.69 Qts
Rated Power
15 W
  • Description
  • Simulation
  • Measure Chart
  • Specification
  • Mechanical Drawing
SPEC SHEET

This compact Tweeter features an 4 ohm 0.6 inch voice coil, a textile dome diaphragm and Neodymium magnet motor system. This Tweeter features CCAW which further extend the high frequency response. This Tweeter comes with a round frame to allow for easy installation into customized faceplates.

Family
Range
 FSA041006-0400

T-S Parameters
Resonance frequency [fs] 1940 Hz
Mechanical Q factor [Qms] 3.348
Electrical Q factor [Qes] 3.449
Total Q factor [Qts]  1.699
Force factor [Bl] 1.485 Tm
Mechanical resistance [Rms] 0.52 kg/s
Moving mass [Mms]  0.143 g
Compliance [Cms] 0.047 mm/N
Effective diaph. diameter [D]  18.5 mm
Effective piston area [Sd] 2.69 cm²
Equivalent volume [Vas] 0.0005 l
Sensitivity (2.83V/1m)  87 dB
Ratio Bl/√Re 0.71 N/√W
Ratio fs/Qts 1142.2 Hz
Electrical Data
Nominal impedance [Zn]  4 Ω
Minimum impedance [Zmin]  3.8 Ω
Maximum impedance [Zo] 6.76 Ω
DC resistance [Re] 4.37 Ω
Voice coil inductance [Le]  0.029 mH
Power Handling
100h RMS noise test (IEC 18.4) 15 W
Long-term max power (IEC 18.2) - W
Voice Coil & Magnet Data
Voice coil diameter 16.4 mm
Voice coil height 2 mm
Voice coil layers 2
Height of gap 2 mm
Linear excursion ± 0 mm
Max mech. excursion ± - mm
Unit weight 0.021 kg

 

FSA041006-0400

Contact Us

Looking for more information?

Please feel free to contact us directly with any product inquiries.

*Fields that are required.