1.25'' Aluminum Cone Fullrange
AUGFL3084-JN01
Features
1.25", Plastic Frame
1” PESVCCAW Voice Coil , Aluminum Former
Aluminum Cone , Rubber Surround
Neodymium Magnet Motor System
Ferrofluid-Cooled
Parameters
Size
1.25 Inch
Fs
570 Hz
Re
3.2 Ohms
Sensitivity
87 dB
Quality Factor
0.82 Qts
Rated Power
10 W
The ultimate 1.25 inch, 4 ohm Plastic frame driver have been newly designed with 1 inch PESVCCAW voice coil, Upgraded Aluminum cone and Neodymium ferro fluid magnet motor system to provide wide range sound experience. This spectacular driver is the new benchmark for soundbar systems.
Family
Range
| T-S Parameters | |
|---|---|
| Resonance frequency [fs] | 573 Hz |
| Mechanical Q factor [Qms] | 2.95 |
| Electrical Q factor [Qes] | 1.13 |
| Total Q factor [Qts] | 0.82 |
| Force factor [Bl] | 3.11 Tm |
| Mechanical resistance [Rms] | 1.06 kg/s |
| Moving mass [Mms] | 0.87 g |
| Compliance [Cms] | 0.088 mm/N |
| Effective diaph. diameter [D] | 33.3 mm |
| Effective piston area [Sd] | 8.71 cm² |
| Equivalent volume [Vas] | 0.0095 l |
| Sensitivity (2.83V/1m) | 87 dB |
| Ratio Bl/√Re | 1.73 N/√W |
| Ratio fs/Qts | 698.7 Hz |
| Electrical Data | |
|---|---|
| Nominal impedance [Zn] | 3.2 Ω |
| Minimum impedance [Zmin] | 3.6 Ω |
| Maximum impedance [Zo] | 12.7 Ω |
| DC resistance [Re] | 3.2 Ω |
| Voice coil inductance [Le] | 0.032 mH |
| Power Handling | |
|---|---|
| 100h RMS noise test (IEC 18.4) | 10 W |
| Long-term max power (IEC 18.2) | - W |
| Voice Coil & Magnet Data | |
|---|---|
| Voice coil diameter | 25.5 mm |
| Voice coil height | 3.2 mm |
| Voice coil layers | 2 |
| Height of gap | 2 mm |
| Linear excursion | ± 0.6 mm |
| Max mech. excursion | ± - mm |
| Unit weight | 0.0826 kg |
