AUGDL0003-JN05
AUGDL0003-JN05
AUGDL0003-JN05
family logo
1" Aluminum Dome Tweeter

AUGDL0003-JN05

Feature
4”, Aluminum Alloy Front Panel
1” CCAW Voice Coil, Aluminum Former
Al-Mg Alloy Dome, Soft Surround
Ferrite Magnet Motor System
Size
1 Inch
Fs
655 Hz
Re
4 Ohms
Sensitivity
90 dB
Quality Factor
0.65 Qts
Rated Power
20 W
  • Description
  • Simulation
  • Measure Chart
  • Specification
  • Mechanical Drawing
SPEC SHEET

This 1 inch Tweeter, features 4 inch Aluminum alloy front panel, Al-Mg alloy dome with soft surround, and ferrite magnet motor system. It has good process ability and high yield for mass production. Because of this special raw material structure and unique processing technology, the attributes of Aluminum offer high strength, good rigidity, good heat resistance, low density and so on.

Family
Range
Characteristics
AUGDL0003-JN05

 

T-S Parameters
Resonance frequency [fs] 656 Hz
Mechanical Q factor [Qms] 1.403
Electrical Q factor [Qes] 1.212
Total Q factor [Qts]  0.65
Force factor [Bl] 2.258 Tm
Mechanical resistance [Rms] 1.083 kg/s
Moving mass [Mms]  0.369 g
Compliance [Cms] 0.16 mm/N
Effective diaph. diameter [D]  30 mm
Effective piston area [Sd] 7.07 cm²
Equivalent volume [Vas] 0.0113 l
Sensitivity (2.83V/1m)  90 dB
Ratio Bl/√Re 1.20 N/√W
Ratio fs/Qts 1009.2 Hz
Electrical Data
Nominal impedance [Zn]  4 Ω
Minimum impedance [Zmin]  3.95 Ω
Maximum impedance [Zo] 6.82 Ω
DC resistance [Re] 3.53 Ω
Voice coil inductance [Le]  0.016 mH
Power Handling
100h RMS noise test (IEC 18.4) 20 W
Long-term max power (IEC 18.2) 30 W
Voice Coil & Magnet Data
Voice coil diameter 25.4 mm
Voice coil height 2.1 mm
Voice coil layers 2
Height of gap 2.5 mm
Linear excursion ± 0.2 mm
Max mech. excursion ± - mm
Unit weight 0.66 kg
AUGDL0003-JN05

Contact Us

Looking for more information?

Please feel free to contact us directly with any product inquiries.

*Fields that are required.