AUGDL0003-JN02
AUGDL0003-JN02
AUGDL0003-JN02
family logo
1" Titanium Dome Tweeter

AUGDL0003-JN02

Features
1", Plastic Frame
Titanium Dome Diaphragm
Dual Neodymium Magnet Motor System
With Ferrofluid-Cooled
Extended Frequency to 30KHz, Low Distortion(<3%)
Size
1 Inch
Fs
1660 Hz
Re
7.2 Ohms
Sensitivity
88 dB
Quality Factor
0.67 Qts
Rated Power
20 W
  • Description
  • Simulation
  • Measure Chart
  • Specification
  • Mechanical Drawing
SPEC SHEET

This compact Tweeter features an 8 ohm 1 inch voice coil, a damped Titanium dome diaphragm and dual Neodymium magnet. The Tweeter features CCAW which extends high frequency response to 30KHz. This tweeter comes with a round frame to allow for easy installation into custom faceplates.

Family
Range
Characteristics
AUGDL0003-JN02
 
T-S Parameters
Resonance frequency [fs] 1660 Hz
Mechanical Q factor [Qms] 0.885
Electrical Q factor [Qes] 2.869
Total Q factor [Qts]  0.676
Force factor [Bl] 2.778 Tm
Mechanical resistance [Rms] 3.476 kg/s
Moving mass [Mms]  0.295 g
Compliance [Cms] 0.031 mm/N
Effective diaph. diameter [D]  30.5 mm
Effective piston area [Sd] 7.31 cm²
Equivalent volume [Vas] 0.0024 l
Sensitivity (2.83V/1m)  88 dB
Ratio Bl/√Re 1.0 N/√W
Ratio fs/Qts 2455.6 Hz
Electrical Data
Nominal impedance [Zn]  8 Ω
Minimum impedance [Zmin]  6.975 Ω
Maximum impedance [Zo] 8.738 Ω
DC resistance [Re] 7.2 Ω
Voice coil inductance [Le]  0.039 mH
Power Handling
100h RMS noise test (IEC 18.4) 20 W
Long-term max power (IEC 18.2) - W
Voice Coil & Magnet Data
Voice coil diameter 25.4 mm
Voice coil height 1.7 mm
Voice coil layers 2
Height of gap 2 mm
Linear excursion ± 0.15 mm
Max mech. excursion ± - mm
Unit weight  0.053kg

 

AUGDL0003-JN02

Contact Us

Looking for more information?

Please feel free to contact us directly with any product inquiries.

*Fields that are required.

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.