AUGWL0013-JN05
AUGWL0013-JN05
AUGWL0013-JN05
family logo
5.25" Carbon Cone Woofer

AUGWL0013-JN05

Features
5.25”, Aluminum Die-cast Frame
1.5” CCAW Voice Coil, Aluminum Former
Pulp and Carbon Fiber Cone, Rubber Surround
Ferrite Magnet Motor System
Conex Spider
Size
5.25 Inch
Fs
50 Hz
Re
3.52 Ohms
Sensitivity
88 dB
Quality Factor
0.34 Qts
Rated Power
50 W
  • Description
  • Simulation
  • Measure Chart
  • Specification
  • Mechanical Drawing
SPEC SHEET

This 5.25 inch Woofer, features 1.5 inch voice coil, pulp with carbon fiber cone, and ferrite magnet motor
system. As for the selection of material, this series of driver uses a new mixed material with pulp and
60% carbon fiber, it can greatly enhance the stiffness of the cone body and control range of the internal damping.

Family
Range
Characteristics
AUGWL0013-JN05
 
T-S Parameters
Resonance frequency [fs] 48.6 Hz
Mechanical Q factor [Qms] 2.076
Electrical Q factor [Qes] 0.409
Total Q factor [Qts]  0.341
Force factor [Bl] 5.714 Tm
Mechanical resistance [Rms] 1.825 kg/s
Moving mass [Mms]  12.414 g
Compliance [Cms] 0.865 mm/N
Effective diaph. diameter [D]  110 mm
Effective piston area [Sd] 95.03 cm²
Equivalent volume [Vas] 11.05 l
Sensitivity (2.83V/1m)  88 dB
Ratio Bl/√Re 3.05 N/√W
Ratio fs/Qts 142.52 Hz
Electrical Data
Nominal impedance [Zn]  4 Ω
Minimum impedance [Zmin]  4.14 Ω
Maximum impedance [Zo] 18.06 Ω
DC resistance [Re] 3.52 Ω
Voice coil inductance [Le]  0.129 mH
Power Handling
100h RMS noise test (IEC 18.4) 50 W
Long-term max power (IEC 18.2) 80 W
Voice Coil & Magnet Data
Voice coil diameter 35.5 mm
Voice coil height 15 mm
Voice coil layers 2
Height of gap 6 mm
Linear excursion ± 4.5 mm
Max mech. excursion ± 15.5 mm
Unit weight 1.53 kg

 

AUGWL0013-JN05

Contact Us

Looking for more information?

Please feel free to contact us directly with any product inquiries.

*Fields that are required.

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.