This is a 10 mm Transducer, it is suitable for TWS and IN EAR headphones, impedance 16 Ω, USES the DCCA copper clad aluminum wire circle, promoted the high frequency of extending new and clarity, compact design makes it have low Distortion.

6 mm Transducer, the use of the magnetic circuit unibody design, application of the composite diaphragm, obtained the good effect of low frequency, and has a lower distortion, it is very suitable for TWS and the IN EAR headphones, impedance 16 Ω, USES the DCCA copper clad aluminum wire circle, promoted the high frequency of extending new and clarity.

This is a 40 mm Transducer, 19 u PET diaphragm, obtained the good effect of intermediate frequency, and has a lower distortion, it is applicable to the OVER the EAR and communications headset, 32 Ω impedance.

Double diaphragm horizontal coaxial system, middle and low frequencies and high frequencies are driven by two diaphragm respectively, and its own frequency dividing line can restore the sound more vividly. The two diaphragm are located on the same horizontal plane, and the high and low frequency sound can reach the ear at the same time.
 

8 mm Transducer, the use of the magnetic circuit unibody design, application of the composite diaphragm, obtained the good effect of low frequency, and has a lower distortion, it is very suitable for TWS and the IN EAR headphones, impedance 16 Ω, USES the DCCA copper clad aluminum wire circle, promoted the high frequency of extending new and clarity.

The sound film is designed with imported TPU and nickel plated PEN.TPU will have a good dive in the bass, thick bass.On the one hand, the PEN nickel plating reduces the vibration mass, and the horn has a fast instantaneous shell reaction speed at high frequency.On the other hand increases the ball top rigidity.It can suppress the high frequency membrane shell and smooth the high frequency curve.The whole product is balanced between the driving component and the vibration component, so the horn has low distortion and good high frequency response.

.

The sound film is designed with imported PEEK.Because PEEK has a high Young's modulus, the membrane shell has a high inhibition effect in the high frequency part, which is very significant.Therefore, the finished earphone made by this speaker has a significant voice clarity in the high pitch and voice part.

Double diaphragm horizontal coaxial system, middle and low frequencies and high frequencies are driven by two diaphragm respectively, and its own frequency dividing line can restore the sound more vividly. The two diaphragm are located on the same horizontal plane, and the high and low frequency sound can reach the ear at the same time.

This is a 16.2 mm Transducer, it is suitable for glasses headphones, impedance 38 Ω, USES the DCCA copper clad aluminum wire circle, promoted the high frequency of extending new and clarity.

The sound film is designed with imported TPU and nickel plated PEN.TPU will have a good dive in the bass, thick bass.On the one hand, the PEN nickel plating reduces the vibration mass, and the horn has a fast instantaneous shell reaction speed at high frequency.On the other hand increases the ball top rigidity.It can suppress the high frequency membrane shell and smooth the high frequency curve.The whole product is balanced between the driving component and the vibration component, so the horn has low distortion and good high frequency response.