ASDCT2000-0600
ASDCT2000-0600
Standard
2" Paper Cone Tweeter

ASDCT2000-0600

Features
2", Steel Frame
0.5", CCAW Voice Coil, Kapton Former
Paper Diaphragm, PU Surround
Ferrite Magnet Motor System
Size
2 Inch
Fs
1585 Hz
Re
5.73 Ohms
Sensitivity
90 dB
Quality Factor
1.01 Qts
Rated Power
20 W
  • Description
  • Measure Chart
  • Specification
  • Mechanical Drawing
SPEC SHEET

This is a 2 inch 6 ohm driver, it is a tweeter features 0.5 inch voice coil with CCAW. In term of suspension system, cone is consisted by Paper Cone body with fixed surround and spider is consisted by Conex. In term of magnet motor system, magnet is consisted by Ferrite material.

Family
Range
 
T-S Parameters
Resonance frequency [fs] 1585 Hz
Mechanical Q factor [Qms] 1.25
Electrical Q factor [Qes] 6.1
Total Q factor [Qts]  1.01
Force factor [Bl] 1.95 Tm
Mechanical resistance [Rms] 3.22 kg/s
Moving mass [Mms]  0.4 g
Compliance [Cms] 0.026 mm/N
Effective diaph. diameter [D]  39 mm
Effective piston area [Sd] 11.95 cm²
Equivalent volume [Vas] 0.005 l
Sensitivity (2.83V/1m)  90 dB
Ratio Bl/√Re 0.79 N/√W
Ratio fs/Qts 1569 Hz
Electrical Data
Nominal impedance [Zn]  6 Ω
Minimum impedance [Zmin]  5.33 Ω
Maximum impedance [Zo] 6.41 Ω
DC resistance [Re] 5.73 Ω
Voice coil inductance [Le]  0.05 mH
Power Handling
100h RMS noise test (IEC 18.4) 20 W
Long-term max power (IEC 18.2)      W
Voice Coil & Magnet Data
Voice coil diameter 13.28 mm
Voice coil height 2.7 mm
Voice coil layers 2
Height of gap 2 mm
Linear excursion ± 0.35 mm
Max mech. excursion ± - mm
Unit weight 0.141 kg

 

ASDCT2000-0600

联络我们

想了解更多产品资讯,请随时与我们联系。

*表示必填栏位

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.