FSB12A265-0300
FSB12A265-0300
FSB12A265-0300
family logo
6.5" Paper Cone Subwoofer

FSB12A265-0300

Features
6.5", Steel Frame
1.2" PESVW Voice Coil, Aluminum Former
Paper Cone, Rubber Surround, Long Excursion(±8.65mm)
Strong Ferrite Magnet Motor System
Pole Piece Vent, Low Distortion (<3%)
With Aluminum Shorting Ring
Size
6.5 Inch
Fs
50 Hz
Re
3.02 Ohms
Sensitivity
86 dB
Quality Factor
0.39 Qts
Rated Power
120 W
  • Description
  • Simulation
  • Measure Chart
  • Specification
  • Mechanical Drawing
SPEC SHEET

This 6.5 inch 3 ohm Subwoofer driver features a powerful ferrite magnet motor system with bump bottom plate, supporting high excursion, and Aluminum shorting ring lower coil inductance and distortion. The long-throw voice coil ensures linear high excursion. Steel frame under spider and bottom plate venting so as to reduce air compression effects.

Family
Range
FSB12A265-0300
 
T-S Parameters
Resonance frequency [fs] 49 Hz
Mechanical Q factor [Qms] 6.111
Electrical Q factor [Qes] 0.420
Total Q factor [Qts]  0.393
Force factor [Bl] 9.528 Tm
Mechanical resistance [Rms] 2.064 kg/s
Moving mass [Mms]  40.994 g
Compliance [Cms] 0.258 mm/N
Effective diaph. diameter [D]  125.25 mm
Effective piston area [Sd] 123.21 cm²
Equivalent volume [Vas] 5.535 l
Sensitivity (2.83V/1m)  86 dB
Ratio Bl/√Re 5.48 N/√W
Ratio fs/Qts 124.68 Hz
Electrical Data
Nominal impedance [Zn]  3 Ω
Minimum impedance [Zmin]  3.904 Ω
Maximum impedance [Zo] 34.089 Ω
DC resistance [Re] 3.02 Ω
Voice coil inductance [Le]  0.75 mH
Power Handling
100h RMS noise test (IEC 18.4) 120 W
Long-term max power (IEC 18.2) - W
Voice Coil & Magnet Data
Voice coil diameter 30.5 mm
Voice coil height 23.3 mm
Voice coil layers 4
Height of gap 6 mm
Linear excursion ± 8.65 mm
Max mech. excursion ± 13.5 mm
Unit weight 2.176 kg

 

FSB12A265-0300

联络我们

想了解更多产品资讯,请随时与我们联系。

*表示必填栏位

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.