AUGWL0006-JN01
AUGWL0006-JN01
AUGWL0006-JN01
family logo
2.25" Radial Magnet Aluminum Cone Woofer

AUGWL0006-JN01

Features
2.25", Aluminum Die-cast Frame
1.4" CCAW Voice Coil, Aluminum Former
Aluminum Cone, Rubber Surround
Radial Neodymium Magnet Motor System
Slim Design
Size
2.25 Inch
Fs
160 Hz
Re
3.4 Ohms
Sensitivity
82 dB
Quality Factor
0.63 Qts
Rated Power
10 W
  • Description
  • Simulation
  • Measure Chart
  • Specification
  • Mechanical Drawing
SPEC SHEET

The 2.25 inch ultra-thin Woofer uses a Die-cast Aluminum frame and an oversized voice coil with short coil width is connected to the cone. This double radial and long magnet system provides high excursion and no stray magnetic field, while a large hole is punched in the bottom of the U-yoke to reduce air pressure at the high excursion. The black anodized cone and dust cap extend the frequency response to high frequency.

Family
Range
AUGWL0006-JN01
 
T-S Parameters
Resonance frequency [fs] 158 Hz
Mechanical Q factor [Qms] 4.539
Electrical Q factor [Qes] 0.736
Total Q factor [Qts]  0.634
Force factor [Bl] 3.524 Tm
Mechanical resistance [Rms] 0.546 kg/s
Moving mass [Mms]  2.497 g
Compliance [Cms] 0.406 mm/N
Effective diaph. diameter [D]  43.8 mm
Effective piston area [Sd] 15.06 cm²
Equivalent volume [Vas] 0.131 l
Sensitivity (2.83V/1m)  82 dB
Ratio Bl/√Re 1.91 N/√W
Ratio fs/Qts 249.21 Hz
Electrical Data
Nominal impedance [Zn]  4 Ω
Minimum impedance [Zmin]  3.931 Ω
Maximum impedance [Zo] 13.785 Ω
DC resistance [Re] 3.4 Ω
Voice coil inductance [Le]  0.143 mH
Power Handling
100h RMS noise test (IEC 18.4) 10 W
Long-term max power (IEC 18.2) - W
Voice Coil & Magnet Data
Voice coil diameter 35.55 mm
Voice coil height 3.6 mm
Voice coil layers 4
Height of gap 8 mm
Linear excursion ± 2.2 mm
Max mech. excursion ± 4.5 mm
Unit weight 0.135 kg
AUGWL0006-JN01

联络我们

想了解更多产品资讯,请随时与我们联系。

*表示必填栏位

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.