Standard
0.8" Textile Dome Tweeter
FSI543010-1602
Features
0.8", Plastic Frame
Textile Dome Diaphragm
Dual Ferrite Magnet Motor System
With Ferrofluid-Cooled
Parameters
Size
0.8 Inch
Fs
2060 Hz
Re
5.5 Ohms
Sensitivity
84 dB
Quality Factor
0.69 Qts
Rated Power
30 W
This is a 0.8 inch 6 ohm driver, it is a Tweeter features 0.8 inch voice coil with CCAW. In term of suspension system, Dome is consisted by Textile material with Textile surround. In term of magnet motor system, magnet is consisted by Ferrite material. It can be used on Soundbar model .
Family
Range
| T-S Parameters | |
|---|---|
| Resonance frequency [fs] | 2059 Hz |
| Mechanical Q factor [Qms] | 0.76 |
| Electrical Q factor [Qes] | 8.25 |
| Total Q factor [Qts] | 0.69 |
| Force factor [Bl] | 0.99 Tm |
| Mechanical resistance [Rms] | 1.93 kg/s |
| Moving mass [Mms] | 0.11 g |
| Compliance [Cms] | 0.052 mm/N |
| Effective diaph. diameter [D] | 25 mm |
| Effective piston area [Sd] | 4.9 cm² |
| Equivalent volume [Vas] | 0.0018 l |
| Sensitivity (2.83V/1m) | 84 dB |
| Ratio Bl/√Re | 0.42 N/√W |
| Ratio fs/Qts | 2984 Hz |
| Electrical Data | |
|---|---|
| Nominal impedance [Zn] | 6 Ω |
| Minimum impedance [Zmin] | 5.5 Ω |
| Maximum impedance [Zo] | 5.6 Ω |
| DC resistance [Re] | 5.5 Ω |
| Voice coil inductance [Le] | 0.025 mH |
| Power Handling | |
|---|---|
| 100h RMS noise test (IEC 18.4) | 30 W |
| Long-term max power (IEC 18.2) | 60 W |
| Voice Coil & Magnet Data | |
|---|---|
| Voice coil diameter | 20.32 mm |
| Voice coil height | 1.1 mm |
| Voice coil layers | 2 |
| Height of gap | 2.5 mm |
| Linear excursion | ± 0.7 mm |
| Max mech. excursion | ± - mm |
| Unit weight | 0.15 kg |
