FSIFD3625-2400
FSIFD3625-2400
Standard
2.5" Paper Cone Fullrange

FSIFD3625-2400

Features
2.5", Steel Frame
0.6" PESVW Voice Coil, Kapton Former
Paper Cone, Rubber Coated Cloth Surround
Ferrite Magnet Motor System
Paper Dome Center Cap
Low Distortion (<3%)
Power Handling with High pass filter -24dB/OCT@ 200 Hz
Size
2.5 Inch
Fs
205 Hz
Re
3.4 Ohms
Sensitivity
85 dB
Quality Factor
1.17 Qts
Rated Power
36 W
  • Description
  • Measure Chart
  • Specification
  • Mechanical Drawing
SPEC SHEET

This is a 2.5 inch 4 ohm driver, it is a Fullrange features 0.6 inch voice coil with PESVW. In term of suspension system, cone is consisted by Paper Cone body with Cloth surround and spider is consisted by NC. In term of magnet motor system, magnet is consisted by Ferrite material. It can be used on  Soundbar model.

Family
Range
 
T-S Parameters
Resonance frequency [fs] 204 Hz
Mechanical Q factor [Qms] 5.67
Electrical Q factor [Qes] 1.48
Total Q factor [Qts]  1.17
Force factor [Bl] 2.33 Tm
Mechanical resistance [Rms] 0.41 kg/s
Moving mass [Mms]  1.84 g
Compliance [Cms] 0.32 mm/N
Effective diaph. diameter [D]  53 mm
Effective piston area [Sd] 22 cm²
Equivalent volume [Vas] 0.22 l
Sensitivity (2.83V/1m)  85 dB
Ratio Bl/√Re 1.27 N/√W
Ratio fs/Qts 174 Hz
Electrical Data
Nominal impedance [Zn]  4 Ω
Minimum impedance [Zmin]  3.7 Ω
Maximum impedance [Zo] 13 Ω
DC resistance [Re] 3.4 Ω
Voice coil inductance [Le]  0.141 mH
Power Handling
100h RMS noise test (IEC 18.4) 36 W
Long-term max power (IEC 18.2) - W
Voice Coil & Magnet Data
Voice coil diameter 14.28 mm
Voice coil height 6.8 mm
Voice coil layers 2
Height of gap 3 mm
Linear excursion ± 1.9 mm
Max mech. excursion ± - mm
Unit weight 0.4 kg

 

FSIFD3625-2400

联络我们

想了解更多产品资讯,请随时与我们联系。

*表示必填栏位

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.