FSA023030-0600
FSA023030-0600
Standard
3" Paper Cone Woofer

FSA023030-0600

Features
3", Steel Frame
1" EISVW Voice Coil, Kapton Former
Paper Cone, Rubber Surround
Ferrite Magnet Motor System
Neodymium Cancelling Magnet on Pole
Size
3 Inch
Fs
100 Hz
Re
5.6 Ohms
Sensitivity
79 dB
Quality Factor
0.58 Qts
Rated Power
12 W
  • Description
  • Measure Chart
  • Specification
  • Mechanical Drawing
SPEC SHEET

This is a 3 inch 6 ohm driver, it is a woofer features 1 inch voice coil with EISVW. In term of suspension system, cone is consisted by Paper Cone body with NBR surround and spider is consisted by Conex. In term of magnet motor system, magnet is consisted by Ferrite and Neodymium material. It can be used on Soundbar model.

Family
Range
 
T-S Parameters
Resonance frequency [fs] 100 Hz
Mechanical Q factor [Qms] 4.9
Electrical Q factor [Qes] 0.658
Total Q factor [Qts]  0.581
Force factor [Bl] 6.583 Tm
Mechanical resistance [Rms] 1.101 kg/s
Moving mass [Mms]  7.658 g
Compliance [Cms] 0.31 mm/N
Effective diaph. diameter [D]  60 mm
Effective piston area [Sd] 28.72 cm²
Equivalent volume [Vas] 0.3507 l
Sensitivity (2.83V/1m)  79 dB
Ratio Bl/√Re 2.78 N/√W
Ratio fs/Qts 172 Hz
Electrical Data
Nominal impedance [Zn]  6 Ω
Minimum impedance [Zmin]  5.8 Ω
Maximum impedance [Zo] 45 Ω
DC resistance [Re] 5.6 Ω
Voice coil inductance [Le]  0.788 mH
Power Handling
100h RMS noise test (IEC 18.4) 12 W
Long-term max power (IEC 18.2) - W
Voice Coil & Magnet Data
Voice coil diameter 25.4 mm
Voice coil height 11 mm
Voice coil layers 4
Height of gap 4 mm
Linear excursion ± 3.5 mm
Max mech. excursion ± - mm
Unit weight 0.43 kg

 

FSA023030-0600

联络我们

想了解更多产品资讯,请随时与我们联系。

*表示必填栏位

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.