FSI522054-5602
FSI522054-5602
Standard
5.25" Paper Cone Woofer

FSI522054-5602

Features
5.25", Steel Frame
1" PESVW Voice Coil, Glass Fiber Former
Paper Cone, Rubber Surround
Dual Ferrite Magnet Motor System
Cone Under Center Cap Vent, Low Distortion(<3%)
Size
5.25 Inch
Fs
55 Hz
Re
5.7 Ohms
Sensitivity
85 dB
Quality Factor
0.7 Qts
Rated Power
20 W
  • Description
  • Measure Chart
  • Specification
  • Mechanical Drawing
SPEC SHEET

This is a 5.25 inch 6 ohm driver, it is a Woofer features 1 inch voice coil with PESVW. In term of suspension system, cone is consisted by Paper Cone body with NBR surround and spider is consisted by NC. In term of magnet motor system, magnet is consisted by Ferrite material. It can be used on HIFI audio.

Family
Range
 
T-S Parameters
Resonance frequency [fs] 55 Hz
Mechanical Q factor [Qms] 12.084
Electrical Q factor [Qes] 0.741
Total Q factor [Qts]  0.698
Force factor [Bl] 5.284 Tm
Mechanical resistance [Rms] 0.300 kg/s
Moving mass [Mms]  10.5 g
Compliance [Cms] 0.800 mm/N
Effective diaph. diameter [D]  110 mm
Effective piston area [Sd] 95 cm²
Equivalent volume [Vas] 10.23 l
Sensitivity (2.83V/1m)  85 dB
Ratio Bl/√Re 2.22 N/√W
Ratio fs/Qts 78.8 Hz
Electrical Data
Nominal impedance [Zn]  6 Ω
Minimum impedance [Zmin]  5.7 Ω
Maximum impedance [Zo] 66.82 Ω
DC resistance [Re] 5.7 Ω
Voice coil inductance [Le]  0.382 mH
Power Handling
100h RMS noise test (IEC 18.4) 20 W
Long-term max power (IEC 18.2) - W
Voice Coil & Magnet Data
Voice coil diameter 25.4 mm
Voice coil height 10.9 mm
Voice coil layers 2
Height of gap 5 mm
Linear excursion ± 2.95 mm
Max mech. excursion ± - mm
Unit weight 0.73 kg

 

FSI522054-5602

联络我们

想了解更多产品资讯,请随时与我们联系。

*表示必填栏位

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.