8" Carbon Cone Woofer
AUGWL0020-JN03
Features
8”, Aluminum Die-cast Frame
2” CCAW Voice Coil, Aluminum Former
Pulp and Carbon Fiber Cone, Rubber Surround
Ferrite Magnet Motor System
Conex Spider
Parameters
Size
8 Inch
Fs
33 Hz
Re
3.36 Ohms
Sensitivity
90 dB
Quality Factor
0.36 Qts
Rated Power
100 W
This 8 inch Woofer, features 2 inch voice coil, pulp with carbon fiber cone, and ferrite magnet motor system. As for the selection of material, this series of driver uses a new mixed material with pulp and 60% carbon fiber, it can greatly enhance the stiffness of the cone body and control range of the internal damping.
Family
Range
Characteristics
| T-S Parameters | |
|---|---|
| Resonance frequency [fs] | 33 Hz |
| Mechanical Q factor [Qms] | 2.514 |
| Electrical Q factor [Qes] | 0.418 |
| Total Q factor [Qts] | 0.358 |
| Force factor [Bl] | 6.887 Tm |
| Mechanical resistance [Rms] | 2.345 kg/s |
| Moving mass [Mms] | 28.407 g |
| Compliance [Cms] | 0.817 mm/N |
| Effective diaph. diameter [D] | 167 mm |
| Effective piston area [Sd] | 219.04 cm² |
| Equivalent volume [Vas] | 55.5 l |
| Sensitivity (2.83V/1m) | 90 dB |
| Ratio Bl/√Re | 3.76 N/√W |
| Ratio fs/Qts | 92.2 Hz |
| Electrical Data | |
|---|---|
| Nominal impedance [Zn] | 4 Ω |
| Minimum impedance [Zmin] | 3.9 Ω |
| Maximum impedance [Zo] | 19 Ω |
| DC resistance [Re] | 3.36 Ω |
| Voice coil inductance [Le] | 0.201 mH |
| Power Handling | |
|---|---|
| 100h RMS noise test (IEC 18.4) | 100 W |
| Long-term max power (IEC 18.2) | 150 W |
| Voice Coil & Magnet Data | |
|---|---|
| Voice coil diameter | 49.55 mm |
| Voice coil height | 17 mm |
| Voice coil layers | 2 |
| Height of gap | 6 mm |
| Linear excursion | ± 5 mm |
| Max mech. excursion | ± 15.5 mm |
| Unit weight | 2.6 kg |
